Bored this lunchtime - give this simple shirt origami a go!
Monday, 30 June 2014
Sunday, 29 June 2014
Simple Origami - Ten Sided Yin Yang Globe
I've decided to learn a new craft each month and this month I've picked up Origami! Now I'm not the most patient of people so when someone on my blog asked me to make a tutorial for a ten sided tin yang globe, I jumped at the offer...after having to look up what it was of course!
Note: I tried to make both ends of each piece the same size but I think one is a little smaller than the other, if it doesn't look like it fits properly then try turning the piece around
Step 1
Cut out your shapes. I've created some Cricut templates but you could also just print out the image file on to thin card and cut it by hand
If you don't have a cutting machine then you can just print out the images below on thin card
Step 2
Hook the individual pieces together so that you end up with this patternNote: I tried to make both ends of each piece the same size but I think one is a little smaller than the other, if it doesn't look like it fits properly then try turning the piece around
Step 3
Flip the piece over so the circle patter in on the bottom and then start to pull the tops of each piece up and lock them into each other as well
If you want to place something inside then do it before pulling up the last pieces!
Step 4
Adjust the pieces until they are evenly spaced and you end up with this candy shape. You can use as many colours as you like but I quite like this two tone effect.
I'll be back,
About to Pop Baby Shower
Before last month I had never thought about themes for a baby shower before...apart from ehh baby themed! But the fabulous Jileen at work opened me up to a world of possibilities.
After searching through lots of themes (which we found on Pinterest) we settled on "About to Pop" and I wanted to share a guide to how we put it together.
Invites
Because we were doing this at work, we just sent out an email to invite people but there are plenty of ideas online on what you can do for your shower - Pinterest again is great for this
Decorations
Balloon Popcorn Picture
We bought Red, White and small Gold balloons and stuck them to the wall to make a popcorn image. Because we were doing this at work we were worried about sellotape etc ripping the paint of the walls so we used blue tac to stick up large pieces of white paper and then stuck the balloons on that with some sticky dots. Also because I'd put the balloons on white paper, I could draw round them to emphasise the shape.
Bunting
I made the popcorn bunting using my Cricut but I've also created an image file as well so that you can just put thin card in your printer and then cut out the shapes yourself.
Cut out as many as you need for the name you are using and "About to Pop" (I put the word "to" into one popcorn box). You will also need to cut/print all your letters as well. Then take a piece of string and then attach them all with gaps in between the words.
Signs
Around the room and one the food/drink we placed about to pop signs to tie the theme together.
Large Popcorn Box Small Circle Image
For the .svg files you will need to build up the layers yourself to look like the images above!
Food
We themed all the food and drink around things that pop:
- popcorn
- lollipops
- cocopop cereal bars
- popping candy
- soda pop (cherryade & lemonade)
- cake pops
We used the popcorn boxes as display stands for the cake pops as well - by placing polystyrene in the bottom of the box, the cake pop sticks fitted in and kept them upright.
We bought our cake pops from Blissful Bakes in Livingston - if you guys are local to the area then definitely check them out because they tasted great!
Presents
We got the baby momma lots of little gifts but my favourite by far was the nappy cake! Jileen put this together based on the theme and added in flowers, ribbon and tissue paper to jazz it up!
Games
The girls came up with lots of fun games to play on the day as well.
Guess the Baby food
Each jar had a letter stuck to the front of it and they also printed of answer sheets for people to fill in.
The answer sheets and jars were passed around and each person tasted the food before writing down their guesses.
Pin the Sperm on the Egg
Everyone in the room was asked to draw a sperm on a post it note. We then took turns getting spun around with our eyes closed and placing our sperm as close as we could to the egg on the wall.
We had winners for:
- best sperm
- closest to the egg
- furthest away from the egg
Don't say the B word
By the end of the shower, those with these bibs remaining had to play one final game.
We each had to blow up a balloon and then put it up our top - not easy when you are wearing a tight dress! Then a load of toys/baby items were scattered on the floor and the person who picked up the most toys was the winner
These toys/baby items can then be given to the baby momma or you can just print off pictures of toys and place them on the floor instead, if you want to save a bit of money.
Hopefully this has given you some baby shower inspiration - they really are so much fun for everyone and a good way to spend some quality time with your friends before the baby comes along.
I'll be back,
Sunday, 22 June 2014
Modified band tshirt
I took all my favourite band tshirts to hellfest in France but hadn't quite banked on it being so hot! After the first day I decided to modify some of my tshirts and came up with this design
Step 1
Pick your tshirt
Step 2
Cut round the neck line. You can also cut the sleeves but I like them left on
Step 3
Fold your tshirt in half so that the front and the back of the tshirt are both folded away from each other
Now you want to cut the back of the tshirt. Take your scissors and cut lots of lines that are slightly angled upwards. You want these lines to be long at the top and short at the bottom, forming a triangle shape
MAKE SURE YOU DON'T CUT THE FRONT OF YOUR TSHIRT
Step 4
Stretch you tshirt lengthways. This makes the straight lines slightly curled
Step 5
Next comes the weaving part. Take your first line and fold it in the middle forming a loop. Then in your other hand, take the line below and feed it through the loop, this forms your second loop. Keep repeating this process until you reach the bottom. I cut my last line in half and put one side through the loop before tying in a knot a couple of times to secure
Step 7
Put that bad boy on and strut round your campsite showing off your handy work!!
Monday, 16 June 2014
Subscribe to:
Posts (Atom)